Productos

147 productos

  • ADA Pads - Consolidated Containment ADA Pads - Consolidated Containment

    Ultra-ADA Pad®

    Detectable warning system aids the visually impaired Ultra-ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with a tapping cane, can alert them to an upcoming intersection or other potential hazards. Product Highlights Available in four (4) sizes: 2’ x 2’, 2’ x 3’, 2’ x 4’ and 2’ x 5’. Safety yellow color assists people with severe visual impairment. Black, brick red and safety red also available. Flexible construction forms to fit dips, slopes, and inclines in sidewalks and walkways. Installs quickly and easily using adhesive and anchors (anchors included, adhesive sold separately). Better slip resistance than composites. Better impact resistance than composites. UNBREAKABLE ADA Pad Adhesive Sold Separately. Additional Information Ultra-ADA Pads (or some other form of warning pad) are mandated by the Americans with Disabilities Act (ADA), 28 CFR Part 36. Ultra-ADA Pads use two methods to ensure that they stay safely attached to the pavement.  The first method is using an industrial-strength adhesive (sold separately).  And once the adhesive has set, a set of concrete anchors (included) are used in the corners of the pad. The Ultra-ADA Pads are NOT designed to be installed in wet concrete.  They can, however, be installed once any newly poured concrete or cement has fully cured. The requirements as per the ADA are, among other things, that “Detectable warnings…shall contrast visually with adjoining surfaces” and “…differ from adjoining walking surfaces in resiliency or sound-on-cane contact.”  Stamped concrete does not comply with either of these requirements. Ultra-ADA Pads are made from urethane, which can bend to meet curves in the surface.  It can be cut for a better/custom fit and it is practically indestructible.  This is beneficial, not only after it has been installed but also eliminates damage to the pads during shipping/transit/storage.  A common problem with fiberglass pads. State and local governments have different requirements for the amount of coverage.  Local authorities should be contacted to confirm the appropriate size needed for each application. The domes are 0.2″ which meets the regulations. The pads can adhere to asphalt but requires a special adhesive. The pads can be cut to fit your application. Please use proper safety precautions. The adhesive is considered to be a hazardous material and therefore can only be shipped via ground transport.  Ultra-ADA Pads - Urethane Part # Dimensions ft. (m) Color Weight lbs. (kg) 0750 2 x 2 x 0 (.6 x .6 x 0) Yellow 8 (3.6) 0753 3 x 2 x 0 (.9 x .6 x 0) Yellow 11 (5) 0751 4 x 2 x 0 (1.2 x .6 x 0) Yellow 15 (6.8) 0752 5 x 2 x 0 (1.5 x .6 x 0) Yellow 19 (8.6) 0760 2 x 2 x 0 (.6 x .6 x 0) Brick Red 8 (3.6) 0763 3 x 2 x 0 (.9 x .6 x 0) Brick Red 11 (5) 0761 4 x 2 x 0 (1.2 x .6 x 0) Brick Red 15 (6.8) 0762 5 x 2 x 0 (1.5 x .6 x 0) Brick Red 19 (8.6) 0765 2 x 2 x 0 (.6 x .6 x 0) Safety Red 8 (3.6) 0766 3 x 2 x 0 (.9 x .6 x 0) Safety Red 11 (5) 0767 4 x 2 x 0 (1.2 x .6 x 0) Safety Red 15 (6.8) 0768 5 x 2 x 0 (1.5 x .6 x 0) Safety Red 19 (8.6) 0756 2 x 2 x 0 (.6 x .6 x 0) Black 8 (3.6) 0759 3 x 2 x 0 (.9 x .6 x 0) Black 11 (5) 0757 4 x 2 x 0 (1.2 x .6 x 0) Black 15 (6.8) 0758 5 x 2 x 0 (1.5 x .6 x 0) Black 19 (8.6)   Helps Comply with These Rules & Regulations ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) ADA Standards for Accessible Design (28 CFR Part 36 (Section 4.29))

    $101.00 - $253.00

  • A bottle and shaker of Ultra-Archaea by UltraTech Six bags of Ultra-Archaea

    Ultra-Archaea

    Supercharging Mother Nature - 100% natural and fast-acting microbes that have an affinity for oil NOTE: Ultra-Archaea (pronounced ar-KEE-uh) used to be called Ultra-Microbes. They are one and the same. Only the name has changed. By adding Ultra-Archaea to a contaminated environment, you can speed up the rate of natural degradation and help the bioremediation process occur in days. All About Ultra-Archaea Where do they come from? Ultra-Archaea are an archaea-based collection of over one hundred different species of microbes that are cultivated from rugged environments such as undersea vents or sites where there is volcanic activity. They are then cultivated with crude oil as the only food source.  Therefore they grow on thousands of organic compounds from benzene to polycyclic aromatic hydrocarbons.  100% natural.   Odors are eliminated within a few hours to a day. The result is 100% natural, fast-acting microbes that have an affinity for oil and other hydrocarbons, as well as organic waste. This specific collection of microbes (Ultra-Archaea) has not been genetically altered or engineered. These naturally occurring microbes have been on the EPA National Contingency List since its inception. Practical Applications Microbes are not just for oil spills—here are some other known applications: Waste Water Treatment Plant — Industrial (refineries, pulp mills, chemicalplants, steel mills, textile plants) Waste Water Treatment Plant — Municipal (collection systems, food processing) Plumbing Maintenance — sinks, grease traps Spill Control Septic Tanks Odor Control Bioremediation — soil, water, stormwater Agriculture/Aquaculture — eliminating ammonia, stormwater Oily Water — oil/water separators, containment sumps, lagoons RV and boat black water holding tanks Bilges of boats Ultra-Archaea Finish First In BP Report In 2011, Louisiana State University conducted testing at the request of British Petroleum, Ltd. (BP). The mission was to conduct tests using bioremediation products listed on the USEPA National Contingency Plan Product List (NCPPL) with weathered crude oil deposited on marsh and sands in Bay Jimmy, Louisiana. Of the ten products on the USEPA National Contingency Plan Product List (NCPPL) that were tested, the Formula used to make the Ultra-Archaea finished first. This data clearly suggested that the Ultra-Archaea have the capability to quickly degrade all hydrocarbon products and reduce or eliminate the toxic conditions of an oil spill. Click here for more information or to download the report, or click here for an analytical data summary of the information. Ultra-Archaea Application Methods Ultra-Archaea speeds up the rate of natural degradation and helps the bioremediation process occur in days and weeks rather than months or years. Ultra-Archaea will digest hydrocarbon molecules and break them down into harmless byproducts of carbon, carbon dioxide, and lipids. Ultra-Archaea – Shakers Ultra-Archaea is housed in a bentonite clay powder that provides the slightly moist environment needed for them to live. Two sizes of shakers available for application on smaller spills or contained areas. Resealable/waterproof containers keep microbes dry/dormant until they are needed. Ultra-Archaea – Water Soluble Packets 4 oz. water-soluble packets can be thrown into oil/water separators, catch basins, grease traps, and other areas to facilitate oil and grease removal. Small size, big results — no measuring, scooping, or spreading. Simply place the entire packet into the area that needs to be cleaned. The water-soluble packet will dissolve and allow the Ultra-Archaea to spread throughout the area. Ultra-Archaea – Bulk Bags Bulk bags (25 lbs.) are available for large spills, open water applications, or frequent use areas. Keep on hand for refilling Shakers or other smaller containers or for large, unexpected spills. Ultra-Archaea -Tablets High concentration of Archaea (20 billion per gram) Easy to break up and flush or drain – Simple to use 12-pack of tubes, 24 tablets per tube Ultra-Archaea – Booms Specially-treated polyethylene (LLDPE) foam used in Ultra-Archaea Booms allows it to float on the water’s surface while also absorbing oil. Microbe tablets (6) are inserted into slits in the foam sleeves — extended water contact causes the tablets to slowly dissolve, releasing the microbes into the water. Booms can be dropped in, or tied off in catch basins (lanyards included), oil/ water separators or other areas where oily water can collect. Dimensions: 6″ x 4″ x 1″ (152mm x 102mm x 25mm). Sold in 6-packs.

    $27.00 - $5,275.00

  • A concrete truck dumps concrete mix into an Ultra-Concrete Washout berm economy model Close up of an Ultra-concrete washout berm economy model

    Ultra-Concrete Washout Berm - Economy Model

    Capture concrete washout in a portable and economical berm The Ultra-Concrete Washout Berm provides an inexpensive and convenient solution to capture the washout created onsite. Once the washout has dried out and solidified, it can typically be disposed of as regular waste. Available in multiple sizes, the Ultra-Concrete Washout Berm can help ensure that every construction site, regardless of size, can stay in compliance. Product Highlights Heavy-duty, rugged construction - designed to contain heavy loads and stand up to the elements. Special water & oil coating. Heavy-duty, 6 mil liner (included) installs quickly - helps contain washout. Specially designed slotted edges “lock” liner in place and keeps it secure. Chemically-resistant materials are compatible with concrete washout, paint waste and other construction materials. Helps comply with EPA regulations. Designed to fold flat for efficient and inexpensive shipping and storage. Additional Information We do not recommend using the berm more than one time. All three sizes fold down when not in use for easier/more efficient shipping and storage. A heavy-duty, 6 mil polyethylene (LLDPE) liner is included with each unit. It can also be used for paint waste, drywall mud and stucco. Washout should be allowed to dry/harden. It can then be broken up and hauled away/disposed of.

    $50.00 - $92.00

  • Gentoo™ Anti-Corrosion & Easy-Cleaning Coating - Consolidated Containment Gentoo™ Anti-Corrosion & Easy-Cleaning Coating - Consolidated Containment

    Gentoo™ Anti-Corrosion & Easy-Cleaning Coating

    Next generation of corrosion-resistant and easy-cleaning coatings Gentoo is the next generation of corrosion-resistant and easy-cleaning coatings. With its combination of high-performing abrasion resistance and very low sliding angle, Gentoo excels where other coatings have fallen short. Traditional hydrophobic coatings are clear and abrasion resistant but do not shed fluid easily. Superhydrophobic coatings are generally great at shedding water, but are not clear, and are easily removed. Conventional coatings have their limitations, but Gentoo is different. Gentoo is a clear coating that not only repels water but most oils and solvents. This makes Gentoo an excellent choice for preventing corrosion, graffiti, and many other applications. It is also able to withstand significant abrasion without sacrificing performance. For a very detailed look at Gentoo, its properties, applications, and detailed test data, please visit GentooCoating.com. How Does Gentoo Work? Gentoo™ is a dense polymer system that forms a barrier against corrosion initiators. This is due to its low surface energy, high density, and low porosity. The system is conformal, pin-hole-free, and very thin (4-6 microns) compared with traditional polymer coatings but far more dense and durable. The higher density of the system provides an excellent barrier to water and corrosive ions. Adhesion & Durability Gentoo has robust adhesion to painted, plated, and bare metallic substrates, as well as glass and surface primed plastics. The coating has demonstrated excellent resistance to salt spray, UV exposure, and chemical exposure – significant improvements over traditional hydrophobic coatings. Corrosion Resistance & Prevention When used on top of other qualified systems, Gentoo further reduces corrosion and extends the lifetime of the barrier system and therefore the coated substrate. This is due to its excellent water and salt shedding properties and impact resistance. These properties also significantly reduce the effects of galvanic corrosion of dissimilar metals. We’ve conducted in-depth testing around Gentoo’s anti-corrosion and prevention properties. Visit GentooCoating.com to learn more. Graffiti Deterrent & Easy Cleaning The low surface energy of the Gentoo coating makes it both hydrophobic and oleophobic. Combined with its high dirt and solvent resistance, also allows for easy cleaning of many surfaces with less water. Gentoo makes for a great graffiti deterrent. Most spray paints consist of paint dissolved into a solvent or solvent mixture to keep them as a sprayable liquid. When the solvents evaporate, the paint is left behind to dry and adhere to the surface. On a Gentoo-coated surface, however, the solvent that would normally “wet out” the surface will bead up before it has a chance to evaporate, as intended. When the solvent does evaporate, the paint is left behind in these same beaded “globs.” In the globs, the paint mostly adheres to itself, with only a small portion loosely adhered to the surface, which is then easily removed. A “tagger” or graffiti artist would almost certainly be deterred from continuing their act upon seeing the paint fail to adhere to its intended surface. Application Gentoo is a two-part coating that is mixed together and then applied as a single coat. It can be flow-coated, dip-coated, HVLP sprayed or painted on with a brush or roller. It provides a lightweight, thin (4-6 microns) coating with minimal surface preparation. Chemical Resistance Offers superior resistance to most oils, solvents, and acids. Hydrophobic Data CONTACT ANGLE WATERSHEDDING (50ΜL) Acrylic 68˚ 21˚ Polycarbonate 77˚ 13˚ Polyurethane 99˚ 26˚ Gentoo 116˚ 4˚ Transparency Data TRANSPARENCY HAZE Untreated Acrylic 94.0 0.7 Gentoo Coated Acrylic 94.0 0.4 Untreated Glass 94.0 0.9 Gentoo Coated Glass 94.1 0.2 Taber Abrasion Test After Abrasion (500 cycles) TRANSPARENCY HAZE Untreated Polyurethane 89.2 18.8 Gentoo Coated Polyurethane 90.6 5.9 Untreated Acrylic 93.3 29.4 Gentoo Coated Acrylic 93.8 4.2 Gentoo Coating Model Weight lbs. (kg) Quantity Notes Gentoo - Quart Kit (Part A and B) 4 (1.8) A: 29 oz (858 ml) B: 32oz. (946ml) Dangerous Goods - Additional charges may apply. Gentoo - 5-gallon (Part A) 33.9 (15.4) 4.5gal. (576oz./17.0L) Dangerous Goods - Additional charges may apply. Gentoo - 5-gallon (Part B) 33.9 (15.4) 5.0gal. (640oz./18.9L) Dangerous Goods - Additional charges may apply.

    $129.00 - $5,070.00

  • A square black berm with fluorescent green track guards A large berm with long fluorescent green track guards

    Ground Tarp & Track Belt

    Protect your containment investment The Ground Tarp, Ground Tarp Plus & Track Belt is the perfect choice for protecting your containment investment. It lays beneath the berm to provide a thick layer of protection against punctures, tears, and rips caused by rocks or debris. The belt ensures that your containment system is prepared to withstand the elements. Ground Tarps go underneath the berm and are typically 1 to 4 feet larger than the berm itself. They are made from an 18.5 oz/sq. yd. polyester blended PVC.  By placing the ground tarp down before you deploy your berm, you can prevent punctures, tears, and rips from rocks or debris that may be underneath the berm’s floor. The Ground Tarp Plus serves the same purpose as the standard ground tarp but is more tear and puncture resistant.  It provides excellent protection in the oil fields and other rocky areas where extra heavy-duty protection is required.  It also has the additional benefit of an absorbent top layer for leaks, drips, and spills. Track Belts are 30” wide sections of material that lie inside the containment berm and act as a “buffer” between a vehicle’s tires and the berm. Track belts come in pairs and will typically run the length of the berm’s usable space. Some customers prefer to get a few extra feet on each end so they can also cover the end walls. The polyester blended PVC layer provides low stretch and good tear resistance. The heavy-duty PVC compound offers excellent oil/hydrocarbon resistance as well as good wear characteristics. Additional Information For smaller berms (10′ x 10′) and smaller, we recommend an 11′ x 11′ ground tarp. For larger berm we usually recommend a tarp that is 4 feet wider and 4 feet longer than the berm. We can make both the Ground Tarp and the Ground Tarp Plus whatever size you need. The Ground Tarp Plus is a heavier duty material and will stand up for larger and sharper rocks and debris. Ground Tarps, Ground Tarp Plus, and Track Belts are not attached to the berm unless you order the “All-In-One” option. Ground Tarps Part # Model Dimensions ft. (m) Weight lbs. (kg) 8311 For all 4' x 6', 6' x 6', and 10' x 10' Ultra-Containment Berms 11 x 11 x 0 (3.4 x 3.4 x 0) 16 (7.3) 8322 For all 12' x 60' Ultra-Containment Berms 64 x 16 x 0 (19.5 x 4.9 x 0) 128 (58.1) 8338 For all 15' x 50' Ultra-Containment Berms 54 x 19 x 0 (16.5 x 5.8 x 0) 152 (68.9) 8334 For all 15' x 66' Ultra-Containment Berms 70 x 19 x 0 (21.3 x 5.8 x 0) 167 (75.7) Ground Tarps Plus Part # Model Dimensions ft. (m) Weight lbs. (kg) 8492 Plus Model 22 x 12.3 x 0 (6.7 x 3.7 x 0) 54 (25) 8493 Plus Model 32 x 12.3 x 0 (9.8 x 3.7 x 0) 79 (36) 8494 Plus Model 52 x 12.3 x 0 (15.8 x 3.7 x 0) 129 (58) 8495 Plus Model 62 x 12.3 x 0 (18.9 x 3.7 x 0) 153 (70) 8497 Plus Model 450 x 12.3 x 0 (137.2 x 3.7 x 0) 1,130 (513) 8496 Plus Model - CUSTOM SIZE N/A N/A Track Belts Part # Model Dimensions ft. (m) Weight lbs. (kg) 8343 Track Belt (Set of 2) - 18 oz. PVC 56 x 2.5 x .2 (17.1 x .8 x .1) 144 (65.3) 8344 Track Belt (Set of 2) - 18 oz. PVC 66 x 2.5 x .2 (20.1 x .8 x .1) 173 (78.5)   WARNING: All part numbers on this page can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov

    $175.00 - $9,161.00

  • A man with a clipboard takes notes next to a Ultra-Build a berm Ultra-Berm Builder® - Consolidated Containment

    Ultra-Berm Builder®

    Build a barrier around machinery or equipment that is permanently mounted or cannot easily be moved The Ultra-Berm Builder component system can be built to just about any size and/or shape that might be needed for your spill containment application. Provides flexibility to create a semi-permanent, high-visibility custom barrier. Has a durable, vinyl covering resists oils, coolants, and most chemicals. Cut-to-length and secure to floor with included sealant, then seal seams with the vinyl adhesive. Product Highlights Economical containment for leaks and spills around machinery and equipment - no need to build expensive cement or angle iron curbs. High-visibility yellow color draws attention to the barrier for increased safety. Easy removal requires only a flat-bladed shovel. Additional Information The Ultra-Berm Builder is an open-cell foam that is wrapped in vinyl. The Ultra-Berm Builder’s sidewalls are designed to be able to be stepped on and/or rolled over with light, wheeled equipment. The open-cell foam barrier will spring back after the weight is removed. If the area that needs contained is larger than what is covered by the full kit, you can always add more straight sections (Part# 8641) and/or more corners (Part# 8642) or whatever is needed for your particular application. All of the components and accessories for the Ultra-Berm Builder are available separately. The Ultra-Berm Builder is meant to a “long-term” installation. Should it become necessary, it can be removed using a flat-bladed shovel. The Ultra-Berm Builder is designed for use on flat, smooth surfaces. The berm builder is designed to be easily cut if necessary. Simply use a utility knife and a straight edge (NOTE: Always wear the appropriate personal protective equipment (PPE)). WARNING: Part #8640-#8643 and #8674-#8676 can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the state of California to cause cancer, birth defects, or reproductive harm. Part #8644 can expose you to chemicals including 1-2-Benzenedicarboxylic acid - di-C8-10-branched alkyl esters - C9-rich which is known to the state of California to cause cancer. Part #8645 can expose you to chemicals including Toluene which is known to the state of California to cause reproductive toxicity. For more information, please visit www.P65Warnings.ca.gov  

    $23.00 - $1,054.00

  • A berm repair kit including a small roller, rectangular plastic and round plastic spots for berm repairs

    Ultra-Berm Repair Kit®

    Ultra-Berm Repair Kit® is the perfect solution for all your XR5, Copolymer-2000, 18, 22, or 40 oz PVC berm repair needs. Its tool box includes a heat gun (110 volt), hand roller, and 4 replacement handles, along with 50 each of the 2”, 4” round and 4” x 12” patches to cover damage.

    $1,532.00

  • A yellow washout berm on top of a pallet with concrete mix being poured into it A flattened Ultra-concrete washout berm

    Ultra-Concrete Washout Berm®

    Maintain a clean, compliant job site with the Ultra-Concrete Washout Berm®. This one-piece, portable solution is designed to collect and contain harmful industrial sediment, including concrete, paint, drywall mud, stucco, and mortar, ensuring that runoff never reaches the surrounding environment. Lightweight and incredibly easy to deploy, this berm is a critical tool for contractors who need a reliable washout station that can be set up in seconds. Rapid Setup & Industrial Strength Instant Deployment: The one-piece design unfolds for simple and quick setup in seconds. Durable Construction: Made from UV-resistant, 10 mil polyethylene (LLDPE) for extended use in outdoor conditions. Universal Compatibility: Designed for use with mixers, pump trucks, and wheelbarrows to accommodate any washout need. Secure Transport: Features built-in tie-downs that allow the berm to be secured to standard wooden pallets for easier handling and repositioning. Simplified Disposal: Once the job is finished and the water has evaporated, the remaining solids can be easily disposed of. Safety & Compliance EPA Ready: Provides an effective on-site containment method that helps your project maintain full EPA compliance. Site Protection: Prevents industrial waste from leaching into the soil or entering local waterways. High Capacity: Measuring 48" x 48" x 14," it offers a 139-gallon capacity while weighing only 5 lbs for maximum portability. Ideal For: Containing concrete slurry and sediment during onsite equipment cleaning. Collecting paint, drywall mud, stucco, and mortar washout. Creating a centralized washout station for pump trucks and mixers on busy job sites.

    $152.00

  • A work truck backing a mini-trailer into a Ultra-Collapsible Berm A mini-trailer in an Ultra-Collapsible Berm

    Ultra-Containment Berm® Collapsible Wall Model

    Economical design sets up quickly and provides secure containment The Ultra-Containment Berm Collapsible Wall Model features an economical design that sets up quickly and provides secure containment. PVC sidewall assemblies provide sturdy support for the containment area but are quickly lowered easy access. Great for spill containment of large quantities of drums, vehicles, frac tanks or other large containers. Product Highlights The collapsible wall model containment berm features rugged PVC sidewall assemblies for sidewall support. Simply swivel the "feet" of the PVC supports to lower or raise the sidewalls in just seconds. Rugged materials provide years of service and excellent chemical compatibility. Add the Ultra-Self Bailer to keep rainwater out of the spill containment berm. Rainwater drains from the berm passively but will automatically shut off if there is a spill. Standard material of construction is Copolymer-2000. Other materials available upon request. Custom sizes available. Additional Information Operating temperatures - PVC:  Max 150°F, Min:  -20°F; Copolymer-2000:  Max 160°F, Min:  -25°F Material Weights - Copolymer 2000 – 25 oz. / sq. yard; PVC – 22 oz. / sq. yard If the chemical is not listed in the guide, chances are that chemical has not been tested with the material.  If we cannot get a definitive answer from our engineering staff, we can send a testing kit to you for a 30-day immersion test. We can make containment berms in custom sizes in virtually any length and width. Custom heights are available for most of the Ultra-Containment Berms. Please contact us for more information. The repair kit is simply an 11” x 36” piece of matching material and instructions on how to apply it to the berm.  The only other item required is an industrial heat gun. The ground tarp provides added protection from punctures or damage from beneath the Ultra-Containment Berm.  Standard procedure is to sweep the area of any rocks or debris, then place the ground tarp down followed by the containment berm. For smaller standard sized berms, the 11′ x 11′ ground tarp is recommended (Part #8311).  For larger berms, the general rule of thumb is to add 4′ to both the length and width dimensions of the berm.  (e.g. a 16′ x 64′ ground tarp would be used for a 12′ x 60′ containment berm.) Track belts are strips of very heavy-duty material (Reinforced PVC) that lay down inside the berm.  They take the wear and tear from tires of the vehicles that are driving in and out of the berms.  Thereby extending the life of the product.

    $657.00 - $6,376.00

  • ADA Pads - Consolidated Containment ADA Pads - Consolidated Containment

    Ultra-ADA Pad® Adhesive

    Adhesive for the detectable warning system that aids the visually impaired Ultra-ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with a tapping cane, can alert them to an upcoming intersection or other potential hazards. The Ultra-ADA Pad® Adhesive is the perfect product to make installation a breeze. Helps Comply with These Rules & Regulations ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) ADA Standards for Accessible Design (28 CFR Part 36 (Section 4.29))

  • Aveho® Odor Removal Technology Aveho® Odor Removal Technology

    Aveho® Odor Removal Technology

    Aveho® Odor Removal Technology is an effective odor removal solution that utilizes nature’s power to remove smells. Perfect for on-the-go, at work, or any other place odors are found, this innovative technology eliminates odor molecules from the air to provide fresh, clean-smelling air. Its natural ingredients enable it to effectively tackle numerous odors, restoring the air to its natural, clean state. What is Aveho – Odor Removal Technology? Aveho Odor Removal Technology is an engineered material consisting of micro-sized particles that capture and physically bind odor-causing compounds or catalytically convert the odor molecules into non-odorous molecules. How Does It Work? Aveho® Odor Removal Technology mimics processes found in nature, where there are strong bonds between metal atoms and amino acids. These amino acids can break down to form numerous odors. Aveho interacts with these odors through its natural tendency to bind with nitrogen, oxygen, and sulfur. This interaction removes the odors from the air. ODOR COMPOUNDS ODOR SOURCES Fish Garlic/Onion Garbage Tobacco Dog Fresh Urine Aged Urine Feces Menses Feet Sulfur compounds xx xxx xxx xx xxx xx xxx x x Acids xxx xx xxx Ketones Aldehydes xx xx x x xx Amines x xxx x x xx Ammonia x x xxx x=small component        x=moderate component           xxx=large component As malodor-causing chemicals and Aveho particles come into contact, Aveho will capture many of them.  Once they are captured, they will either remain bound to the Aveho particles, or they are converted into different chemicals that do not smell unpleasant. How Does Aveho® Compare to Fragrance-Based Odor Fighting Products? Many products that are considered odor eliminators, like air fresheners, do not eliminate bad odors at all. Instead, they mask or attempt to mask the bad odors with “pleasant” fragrances. Because everyone has a unique sense of smell, not everyone can agree on which fragrances are pleasant, and which are less pleasant or simply not desirable at all.  And because people smell things differently, the same masking fragrance may or may not cover up the bad smells. How Does Aveho® Compare to Baking Soda and Activated Carbon? Baking soda and activated carbon both absorb a large variety of smells. In fact, activated carbon absorbs both bad and good odors. Because these odor absorbers attract so many different odors, it is easy for their capacity to be used up quickly.  This means a significant quantity of baking soda or activated carbon would be required to eliminate a specific odor and would have to be changed out often. Aveho has selective odor elimination technology. Different classes of bad odors, whether based on sulfur, nitrogen or oxygen are specifically targeted by different types of Aveho. This means Aveho won’t get used up as quickly as baking soda or carbon and has the potential to continue to eliminate bad odors as they are generated.  Aveho also won’t absorb most pleasant fragrances, if you choose to introduce them. How Does Aveho® Compare to Antimicrobials? Antimicrobial chemicals, aka antimicrobials, are designed to kill microbes.  It has been shown that not all microbes are bad. In fact, many microbes are good, and help us stay safe and healthy. When antimicrobials are used, they destroy the organisms that produce bad odors.  However, these chemicals may also kill the microbes we want to keep.  Microbes create unpleasant odors when they excrete what they have eaten. Aveho targets the resulting unpleasant odors but does not target the microbes themselves. Many odors (smoke, some rotting food, pet odors, some body odors, etc.) are not derived from microbes, so antimicrobials have no effect on these type of odors. Aveho eliminates bad odors whether or not they were caused by microbes. Key Advantages: Capable of removing target odors, without affecting most desired scents More capacity than activated carbon in most applications Scientifically eliminates odors in air and liquids Removes odors without adding any fragrance Does not release odors due to moisture or heat Potential Product Applications Aveho® Odor Removal Technology is very versatile and can be used to treat any number of areas. Some possible examples include: The refrigerator – Aveho odor removal was demonstrated in laboratory testing to outperform sodium bicarbonate (baking soda) for removing odors generated in the refrigerator. The trash can – Spray Aveho odor removal under the lid, along the sidewalls or onto the trash itself. Feet – Sneakers, locker rooms, gyms, yoga studios, bowling alleys, skating rinks, martial arts dojos - the list goes on. Aveho odor removal was evaluated on a key chemical compound responsible for foot odor. Pets – Aveho odor removal is the perfect solution for malodors from cat litter boxes, bedding, wet dogs, and areas they aren’t supposed to use as a toilet, but do anyway. Smoke – Odors from the smoke of cigarettes, cigars, house fires, campfires, and other sources can be quickly and permanently removed by Aveho. Body – Aveho can “clear the air” and eliminate body odors from fabrics, spaces and containers. Declaration – Users are responsible for determining the suitability of Aveho odor removal technology for their own particular purpose. Aveho Odor Removal Technology Model Weight lbs. (kg) Aveho - 5 gal. 8.0 (3.6) Aveho - 50 gal. 42.0 (19.0) Aveho - 250 gal. 424.0 (192.3)

    $199.00 - $6,658.00

  • Scissor Lift AerialJacket® - 100" Height Scissor Lift AerialJacket® - 100" Height

    Scissor Lift AerialJacket® - 100" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water-resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $789.00 - $999.00

  • Scissor Lift AerialJacket® - 28" Height Scissor Lift AerialJacket® - 28" Height

    Scissor Lift AerialJacket® - 28" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $279.00 - $449.00

  • Scissor Lift AerialJacket® - 56" Height Scissor Lift AerialJacket® - 56" Height

    Scissor Lift AerialJacket® - 56" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $539.00 - $629.00

  • Scissor Lift AerialJacket® - 110" Height Scissor Lift AerialJacket® - 110" Height

    Scissor Lift AerialJacket® - 110" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $789.00

  • Scissor Lift AerialJacket® - 32" Height Scissor Lift AerialJacket® - 32" Height

    Scissor Lift AerialJacket® - 32" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $289.00 - $499.00

  • Scissor Lift AerialJacket® - 36" Height Scissor Lift AerialJacket® - 36" Height

    Scissor Lift AerialJacket® - 36" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $319.00 - $489.00

  • Scissor Lift AerialJacket® - 50" Height Scissor Lift AerialJacket® - 50" Height

    Scissor Lift AerialJacket® - 50" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $499.00 - $609.00

  • Scissor Lift AerialJacket® - 62" Height Scissor Lift AerialJacket® - 62" Height

    Scissor Lift AerialJacket® - 62" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $549.00 - $609.00

  • Scissor Lift AerialJacket® - 68" Height Scissor Lift AerialJacket® - 68" Height

    Scissor Lift AerialJacket® - 68" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $559.00 - $629.00

  • Scissor Lift AerialJacket® - 76" Height Scissor Lift AerialJacket® - 76" Height

    Scissor Lift AerialJacket® - 76" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $609.00 - $839.00

  • Scissor Lift AerialJacket® - 84" Height Scissor Lift AerialJacket® - 84" Height

    Scissor Lift AerialJacket® - 84" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $749.00 - $959.00

  • Scissor Lift AerialJacket® - 92" Height Scissor Lift AerialJacket® - 92" Height

    Scissor Lift AerialJacket® - 92" Height

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $769.00 - $979.00

  • Boom Lift Control Box AerialJacket® Boom Lift Control Box AerialJacket®

    Boom Lift Control Box AerialJacket®

    AerialJackets® protect scissor lifts, control boxes and boom baskets during transport and from the elements, dust, and debris. Constructed of heavy-duty, water-resistant material, our covers will keep your equipment looking great and protect your controls from damage. Products are easy to install and include a retractable lock to prevent unwanted use and theft. AerialJackets® are constructed to allow easy access to controls and charging ports without removing the cover. Add your full-color logo to create a unique marketing opportunity and always stand out on the job site. Measured Height (in.) x Length (in.) x Width (in.) View the Measurement Guide Features and Benefits: AerialJackets®, sometimes referred to as equipment covers, scissor lift covers, boom lift basket covers, control box covers, or equip covers offer several advantages over similar products. Effective and durable, AerialJackets® protect scissor lifts, control boxes and boom baskets as well as their controls from indoor and outdoor contaminants such as dust, grime, water, snow, ice, sun, and wind.  All of these elements threaten the equipment contractors depend on. If even one piece of equipment is damaged or out of service, it can significantly impact a project. As a contractor, it is important to keep the equipment that is on your jobsite, as well as equipment not currently in use, protected. AerialJackets® are constructed of heavy-duty, water-resistant material, are easy to install and include a retractable lock to prevent unwanted use and theft. The design allows easy access to controls and charging ports without removing the cover. In addition to the protective applications, AerialJackets® are a great option to keep machines that must be stored on a jobsite from becoming an eyesore with your custom full-color logo. AerialJackets® are manufactured in the USA at our headquarters in Englewood, CO. Manufacturing on site allows us the ability to fit any pieces of equipment. You can worry about your job and we’ll take care of the fit. Made in the USA Easy to install Custom sized to fit specific machine Allows access to controls and charging ports Retractable lock to prevent unwanted use and theft No tarps to try to secure or tie down Bungee base for a secure fit Saves controls from water damage Fully protects stored machine Customizable with your company logo Options and Upgrades: Custom Color Logo Customize AerialJackets® for Scissor Lifts, Control Boxes and Boom Baskets with your full-color company logo at NO ADDITIONAL CHARGE*. Custom logos offer a unique branding opportunity that will set your equipment apart from the rest! In addition, the extra job site exposure gained is a valuable marketing tool. *One-time set-up fee AerialJackets® Frequently Asked Questions:  Is the material waterproof? Yes, they are constructed of heavy-duty, water resistant material that will help keep your equipment looking great. Do you have the AerialJackets® in stock? The turnaround time is one additional day in production from order date. *Quantities may affect the turnaround time. Can I put my company logo or my customer’s logo on the AerialJackets®? Yes, you can print the company logo or a customer’s logo on the AerialJackets®. The logo on the AerialJackets® can be printed in color! There is a onetime set up fee, but after this there will be no charge as long as the logo is used at least once a year. How long do they last? It depends on how they are stored inside or outside. Customers should get at least 1 year out of them minimum. AerialJackets® are constructed to protect your equipment from the elements, dust and debris. The time that you get on the product varies from customer to customer. Depending on the elements that the product is put up against affects the time the AerialJackets last. What material are they made out of? Nylon fiber fabric as the base material. For the Fitting Device: Shock Cord (Bungee) of latex rubber core with braided cotton or nylon yarn covering, fitted with hook at each end.

    $129.00 - $159.00


Has visto 96 de 147 productos

Ingresa en

¿Ha olvidado su contraseña?

¿Aún no tienes una cuenta?
Crear una cuenta