Productos
-
Ultra-Rack Protector Plus®
The Ultra-Rack Protector Plus® is the perfect solution to prevent costly warehouse racking damage. Its easy-to-install Earth magnets allow secure installation and its polyethylene construction is maintenance-free. With a safety yellow and black striped design, it is stackable for added protection, working with racking up to 4" wide. Keep your facility safe and prevent damage with this reliable protector. Heavy-duty magnet makes installation quick and easy Protect warehouse racking from damage from forklifts, pallet jacks and other equipment. The Ultra-Rack Protector Plus installs instantly to warehouse racking using a rare earth magnet. Product Highlights Heavy-duty magnet holds unit securely in place - no hardware required for installation. Polyethylene construction is maintenance free - no painting or upkeep required. Safety yellow color with contrasting black warning stripes provides excellent visual reference for drivers and other warehouse personnel. Stack multiple units for additional protection. Works with racking up to 4" wide. Ultra-Rack Protector Plus Model Dimensions in. (mm) Weight lbs. (kg) Ultra-Rack Protector Plus 5.3 x 3.3 x 15.5 (135.4 x 82.6 x 393.7) 1.5 (.7)
$42.00
-
Ultra-Rack Sump®
Polyethylene warehouse rack containment sump keeps dangerous and costly spills off of floors, equipment, and inventory Storing drums on pallet racks can save a lot of valuable floor space in factories, warehouses, and other facilities. And while products like the Ultra-Rack Containment Tray® work very well to capture nuisance leaks, drips, and spills, it won’t meet the EPA or SPCC spill containment regulations. When compliance with spill containment regulations isa requirement, the Ultra-Rack Sump® is the product of choice. The all-polyethylene, 66-gallon sump, is designed to fit on any standard industrial racking and works with most typical wooden pallets. An optional drain/ball valve makes removing any spillage from the sump quick and easy. Product Highlights Large, 66-gallon sump complies with SPCC and EPA spill containment regulations. Unit holds up to four (4) 55-gallon drums on a standard shipping pallet. Low-profile design fits into warehouse racking with minimal obstruction to adjacent storage areas. Allows direct forklift access to wooden pallet - sump unit stays positioned on the rack when removing pallet and drums. All-polyethylene construction will not rust or corrode - provides excellent chemical resistance. Yellow, translucent color allows quick, floor-level visual inspection for spills/leaks. Designed to accommodate standard 40 x 48 or 48 x 48 wooden pallets. Nestable design minimizes storage/shipping space. Optional drain/ball valve assembly allows for quick and easy draining. Standard 3/4" hose can be connected to assembly to easily drain Ultra-Rack Sumps that are not at floor level. Ultra-Rack Sump Part # Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) UT-2395 Without Drain 51.5 x 51.5 x 12 (1308.1 x 1308.1 x 304.8)Inside: 49 x 49 (1,245 x 1,245) 66 (249.8) 50 (22.7) UT-2396 With Drain 51.5 x 51.5 x 12 (1308.1 x 1308.1 x 304.8)Inside: 49 x 49 (1,245 x 1,245) 66 (249.8) 50 (22.7)
$520.00 - $561.00
-
Ultra-Rapid Boom
The Ultra-Rapid Boom provides an essential solution for containing open water oil spills. The advanced containment technology stops the spread of oil and can be deployed in just 2 minutes with its lightweight and portable design. It helps to control spillage at its source and improves clean-up effectiveness for a reliable response. The fastest deploying oil boom on the planet™ The oil spill first response system that immediately stops the spread of oil using advanced containment technology. Oil spills cause tremendous damage because of long response times. The longer it takes, the more the oil spreads causing extensive damage to the environment, infrastructure closure, accumulated cost and public scrutiny. Our lightweight and portable solution enables deployment within minutes by just two people, drastically reducing spill damage. With immediate containment capabilities, Ultra-Rapid Boom controls the spill at its source, improving clean-up effectiveness. Product Highlights Portable: Lightweight and portable design supporting a rapid response - containment in minutes not hours. Easy Handling: Easy-to-use and only requires two non-specialized personnel. Convenient: Instead of bringing people and equipment to site after the spill, the equipment is available on site for rapid deployment. Immediate Response: Contain marine oil spills immediately without heavy machinery or trained responders. Better Containment: Improves oil spill response effectiveness by containing oil when the spill occurs and stopping its spread thereby supporting clean-up methods. Reduced Impact: Helps avoid/reduce costly clean-up measures, infrastructure shutdowns, negative press, and regulatory fines. Smart Design: Durable and designed to respond effectively in coastal and inland waterways as well as offshore. Unlimited Length: Contains any size spill with unlimited length capacity. Less Storage Required: Requires 20-33% less storage space than ordinary containment boom. An all-terrain vehicle can carry 500 ft (152.4 m), and a 20 ft container can hold 7,500 ft (2,286 m). Ultra-Rapid Boom Part # Model Dimensions ft. (m) Weight lbs. (kg) UT-9690 Ultra-Rapid Boom 50 (15) 43 (19.6)
$3,248.00
-
Ultra-Repair Putty®
Epoxy putty tackles the toughest repair jobs Ultra-Repair Putty® is a revolutionary quick-fix solution for many different materials. With only 1 hour of hardening time, the putty is a sure-fire way to patch up leaky drums and containers. It comes in 12 sticks per box, so you can stay prepared for any repair. Product Highlights Adheres to steel, glass, masonry and most plastics. A quick and effective solution to cracks, broken seals and leaks. Simply pinch off the amount desired, knead to a uniform gray and press into place. Hardens like steel in only one hour! Physical Properties Density 15 4/5 lbs./gal. Modulus of Elasticity 6 x 105 psi Hardness (Shore D) 85 Compression Strength 8,000 psi Shear Strength 700 psi Tensile Strength 6,000 psi Temp (Intermittent) 300°F (149°C) Izod Impact 3 ft.-lb./in. of notch Temp. (Continuous) 250°F (121°C) Storage Conditions Exothermic reaction at 123°F. (51° C). Unaffected by cold. Best used when warm. Shelf Life Several years if stored in original tube with cap on. Ultra-Repair Putty Part # Model Quantity Dimensions in. (mm) Weight lbs. (kg) UT-2120 Ultra-Repair Putty (12 ct.) Case of 12 Sticks 7 x .9 x .9 (177.8 x 22.4 x 22.4) 4 (1.8)
$117.00
-
Ultra-Response Shovel®
The Ultra-Response Shovel® is an essential tool for any facility. Made of heavy-duty LLDPE and designed for shoveling granular sorbents, sludges, and contaminated soil, this shovel is built for long-term use and offers excellent chemical resistance. Its non-sparking design ensures safety, and its easy breakdown makes it ideal for fitting in most spill kits. Collapsible shovel is perfect for spill kits Cleaning up a spill is a tough job. But a good shovel is very helpful in making it a little easier. The Ultra-Response Shovel is a sturdy, non-sparking shovel that breaks down to fit easily inside most spill kits. Product Highlights Rugged construction allows shoveling of granular sorbents, sludges, and contaminated soil. Heavy-duty polyethylene (LLDPE) scoop and excellent chemical resistance. Large, sturdy, molded polyethylene (LLDPE) “D” grip handle. Quick-release shaft breaks down for easy storage/transport. Ultra-Response Shovels Model Dimensions in. (mm) Weight lbs. (kg) Shovel 37", Polyethylene 37 x 10 x 11 (939.8 x 254 x 279.4) 2 (.9) WARNING: Part #0404 can expose you to chemicals including lead which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov
$28.00
-
Ultra-Safety Cabinet Bladder System®
The Ultra-Safety Cabinet Bladder System® provides ultimate safety and security for vertical drum storage cabinets. Its inner steel framework ensures stability and maximum integrity even in extreme conditions. Installation is straightforward and hassle-free. Moreover, its low profile design delivers easy access and convenience. Retrofitting to all vertical drum storage cabinets is a breeze. Safety cabinets not included. Out of sight, should not be out of mind… Fire-rated drum safety cabinets were designed many years ago. Their primary goal was to protect the contents from direct flame and heat, but spill control was not a consideration. The Ultra-Safety Cabinet Bladder Systems® allow convenient and economical retrofitting of all drum safety cabinets on the market. By adding these units to your safety cabinet, you can easily comply with fire and spill containment regulations! Product Highlights Easy installation - simply raise existing drum cabinets, slide the Ultra-Safety Cabinet Bladder System in place, and lower the cabinet on top of the structural steel frame. Heavy-duty, inner steel framework will keep cabinets stable, even in a fire. Designed to retrofit all vertical drum storage cabinets on the market. (See support frame dimensions below for more information). The only low-profile spill containment devices specifically for safety cabinets. Bring your vertical drum storage cabinets into compliance with EPA 40 CFR 264.175 for spill containment of flammable and combustible liquids. Significant leaks or spills unfurl the hidden containment bladder to provide complete spill containment. Small spills are captured inside the polyethylene (LLDPE) sump. Low profile design firmly positions drum cabinets only 6 1/4" off the plant floor, thereby allowing wastes to be poured into drum-top funnels at convenient height. The potential for splashes into the eyes or face is significantly reduced as compared to taller containment devices. Significant leaks flow over the cabinet door sill and into the polyethylene (LLDPE) containment bladder will automatically unfurl as the sump fills up. Ultra-Safety Cabinet Bladder Systems Model Dimensions in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) 1-Drum Model 37.8 x 37.8 x 6.3 (958.9 x 958.9 x 158.8) 1500 (680.4) 93 (352) 57 (25.9) 2-Drum Model 63 x 38.5 x 6.3 (1600.2 x 977.9 x 158.8) 3000 (1360.8) 111 (420.2) 85 (38.6) NOTE: Safety cabinet is NOT included.
$512.00 - $605.00
-
Ultra-Self Bailer®
Passively filter hydrocarbons from stormwater in outdoor containment products Outdoor spill containment presents a challenge that is not seen indoors…rain. Unless outdoor spill containment is covered / protected from the elements, it is susceptible to rainfall. If a containment unit’s sump gets filled up with rainwater, it loses its capacity to contain spills. In other words, for every gallon of rain in the sump, there is one less gallon of chemical / fuel / hazmat that can be contained. The Ultra-Self Bailer® is designed to attach to any spill containment unit, typically by a bulkhead fitting. Rainwater drains through the bulkhead fitting and any residual oil, gas or other hydrocarbons is removed by the filter media inside the unit, allowing only clean water to exit. In the event of a spill, the media swells, completely sealing off the self bailer, preventing any liquid from escaping. Product Highlights The best protection for non-monitored containment sites. Helps eliminate problems associated with the collection of rainwater in outdoor containment products. Simple installation - can be connected to almost any UltraTech containment product. Hydrocarbon "sheens" and modest spills are captured - clean stormwater drains through the outflow port. Larger or concentrated spills activate "auto shut-off" mechanism. Manual shut-off valve can be used to secure all draining operations, change out the filter cartridge. Filters are quickly and easily replaced. PVC construction - will not rust or corrode. Ultra-Self Bailer Model Dimensions in. (mm) Weight lbs. (kg) Notes Standard 28 x 3.5 x 3.5 (711.2 x 88.9 x 88.9) 2 (.9) 6-28 oz. Capacity | Cut-off Loss:* 7-10 oz. | Flow Rate: 7.5 (29) gal (L) per hour** Large 36 x 4.5 x 4.5 (914.4 x 114.3 x 114.3) 6 (2.7) 21-28 oz. Capacity | Cut-off Loss:* 26-32 oz. | Flow Rate: 22 (84) gal (L) per hour** XL 39 x 6.5 x 6.5 (990.6 x 165.1 x 165.1) 11 (5) 140-156 oz. Capacity | Cut-off Loss:* 150-165 oz. | Flow Rate: 42 (159) gal (L) per hour** Replacement Filters Model Quantity Ultra-Self Bailer Replacement Filters - Standard 2 Filters Ultra-Self Bailer Replacement Filters - Large 1 Filter Ultra-Self Bailer Replacement Filters - XL 1 Filter * Cut-off loss is the approximate amount of hydrocarbons that may pass through the self-bailer prior to complete shut-off in the event of a spill. ** At 2” WC (Head Pressure) WARNING: Part UT-9926 through UT-9928 and Part UT-9935 through UT-9938 can expose you to chemicals including titanium dioxide which is known to the State of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov
$278.00 - $781.00
-
Ultra-Sidewinder Cable Protection System®
Protect cords and cables and avoid dangerous tripping hazards The Ultra-Sidewinder Cable Protection System® is an innovative new solution for protecting cables run across a floor. The new design articulates left and right—allowing the system to turn corners and adapt to the layout of the room while maintaining full protection for the cables and trip protection for pedestrians. Cables can be left in the system for the ultimate in portability, or left in place indefinitely. There is no longer a compromise between safety and flexibility. Product Highlights Articulating pieces offer flexible design - curves, corners and s-curves are easily made while maintaining a completely flat profile. Modular design makes it easy to reconfigure, repair and replace targeted segments, even while the cable remains connected. Simple "snap in" assembly - no tools or cutting required. Ramps available for ADA compliance. Fully customizable length. UV Resistant - can be used indoors or outdoors. Black & yellow color provides additional "safety tape" type visual warning. Also available in all black. Also available in all black, gray and brown to complement any floor (small size only). The Risk of Fire National Fire Protection Association (NFPA) – “Electrical cords should not be run under carpets or rugs, as the wires can be damaged by foot traffic, then overheat and ignite the carpet or rug over them.” U.S. Consumer Product Safety Commission – “Never cover any part of an extension cord with… rugs… while in use (and) never place an extension cord where it is likely to be damaged by heavy furniture or foot traffic.” U.S. Fire Administration – “Many avoidable electric fires can be traced to misuse of electric cords, such as… running the cords under rugs or in high traffic areas.” The Ultra-Sidewinder Cable Protection System® eliminates the fire hazard associated with electrical cords as its rigid structure keeps the cord from being impacted and maintains the integrity of the insulation that keeps the wires from shorting out. The Risk of Injury or Damage U.S. Consumer Product Safety Commission – The U.S. Consumer Product Safety Commission (CPSC) estimates that each year, about 2,000 fractures, lacerations, contusions, or sprains are treated in hospital emergency rooms from people tripping over extension cords. (CPSC Document #16) Tripping on cords is due to three possible conditions. The Ultra-Sidewinder provides trip protection from these conditions: It protects from trips when you step on a round cord and it rolls under your foot. The rubber feet on the bottom keep it from sliding when stepped on. It protects you if you kick the cord. A cord that does not move when kicked creates a trip hazard. The Ultra-Sidewinder is designed to give when kicked to minimize the hazard. Cords can loop up and not sit flat on the floor. This creates an opening for one’s foot to get hooked into and cause a trip or fall. The Ultra-Sidewinder covers the cords and eliminates this concern. Ultra-Sidewinder Cable Protection System® - Small Model Color Dimensions in. (mm) Weight lbs. (kg) Weight Capacity UDL lbs. (kg) System with Endcaps Black/Yellow 39.5 x 3 x .8 (1003.3 x 76.2 x 19.1) 1.5 (.7) 2,000 lbs./in2 (140.6 kg./cm2 ) Extension Black/Yellow 13.1 x 3 x .8 (333.2 x 76.2 x 19.1) 0.5 (.2) 2,000 lbs./in2 (140.6 kg./cm2 ) 24-Foot Bulk Box System Black/Yellow 288 x 3 x .8 (7315.2 x 76.2 x 19.1) 10 (4.5) 2,000 lbs./in2 (140.6 kg./cm2 ) System with Endcaps Black 39.5 x 3 x .8 (1003.3 x 76.2 x 19.1) 1.5 (.7) 2,000 lbs./in2 (140.6 kg./cm2 ) Extension Black 13.1 x 3 x .8 (333.2 x 76.2 x 19.1) 0.5 (.2) 2,000 lbs./in2 (140.6 kg./cm2 ) System with Endcaps Brown 39.5 x 3 x .8 (1003.3 x 76.2 x 19.1) 1.5 (.7) 2,000 lbs./in2 (140.6 kg./cm2 ) Extension Brown 13.1 x 3 x .8 (333.2 x 76.2 x 19.1) 0.5 (.2) 2,000 lbs./in2 (140.6 kg./cm2 ) System with Endcaps Gray 39.5 x 3 x .8 (1003.3 x 76.2 x 19.1) 1.5 (.7) 2,000 lbs./in2 (140.6 kg./cm2 ) Extension Gray 13.1 x 3 x .8 (333.2 x 76.2 x 19.1) 0.5 (.2) 2,000 lbs./in2 (140.6 kg./cm2 ) Ultra-Sidewinder Cable Protection System® - Medium Model Color Dimensions in. (mm) Weight lbs. (kg) Weight Capacity UDL lbs. (kg) System with Endcaps Black/Yellow 33 x 9.8 x 1.4 (838.2 x 247.7 x 35.1) 6 (2.7) 260 lbs./in2 (18.3 kg./cm2 ) Extension Black/Yellow 14.1 x 9.8 x 1.4 (358.6 x 247.7 x 35.1) 2 (.9) 260 lbs./in2 (18.3 kg./cm2 ) System with Endcaps Black 33 x 9.8 x 1.4 (838.2 x 247.7 x 35.1) 6 (2.7) 260 lbs./in2 (18.3 kg./cm2 ) Extension Black 14.1 x 9.8 x 1.4 (358.6 x 247.7 x 35.1) 2 (.9) 260 lbs./in2 (18.3 kg./cm2 ) Ultra-Sidewinder Cable Protection System® - Large Model Color Dimensions in. (mm) Weight lbs. (kg) Weight Capacity UDL lbs. (kg) System with Endcaps Black/Yellow 34 x 13.6 x 2.1 (863.6 x 346.2 x 54.1) 13.5 (6.1) 260 lbs./in2 (18.3 kg./cm2 ) Extension Black/Yellow 14.1 x 12 x 2.1 (358.6 x 304.8 x 54.1) 4.5 (2) 260 lbs./in2 (18.3 kg./cm2 ) System with Endcaps Black 34 x 13.6 x 2.1 (863.6 x 346.2 x 54.1) 13.5 (6.1) 260 lbs./in2 (18.3 kg./cm2 ) Extension Black 14.1 x 12 x 2.1 (358.6 x 304.8 x 54.1) 4.5 (2) 260 lbs./in2 (18.3 kg./cm2 )
$16.00 - $257.00
-
Ultra-Silt Dike®
Triangular silt dike barrier systems help contain eroded soils The Ultra-Silt Dike® barrier consists of urethane foam and geotextile fabric. Designed with protective aprons on both sides of the barrier, there is only one sewn seam (on the front upstream side) which allows the barrier to be configured in several different applications. The materials and the design make this device lightweight, easy and fast to install, and more effective than other sediment control products. Made of lightweight and durable materials, the Ultra-Silt Dike barrier comes in seven-foot sections and installs in minutes with U-shaped wire staples. The flexibility of the barrier allows it to be installed on rough and rocky terrain, while the protective aprons on both sides of the barrier help prevent erosion and failure of the structure. Product Highlights Designed as an effective and economical alternative to straw bales, silt fence, and rock check dams. Patented design provides effective erosion and sediment control. Aprons on either side of dike prevent erosion and failure of the structure. Optional, U-shaped wire staples help secure unit in place and conform to rough terrain. Lightweight and durable construction — installs in minutes. Multiple units can be installed side-by-side for larger areas. Other uses include: ditch check dams, diversion dikes, drop inlet protection, continuous barrier, temporary ditch liner and stream and pond protection. Ultra-Silt Dike Color Dimensions in. (mm) Weight lbs. (kg) Black 84 x 67 x 10.5 (2133.6 x 1701.8 x 266.7) 8.0 (3.6) Green 84 x 67 x 10.5 (2133.6 x 1701.8 x 266.7) 8.0 (3.6) Options Model Quantity U-Shaped Staples Box of 1000
$48.00 - $64.00
-
Ultra-Spill Berm®
Temporary spill berm seals off spills from the environment, nearby drains and doorways Many storm drains empty directly into waterways making them a key area to protect in the case of a spill. The Ultra-Spill Berm is a quick and easy to deploy spill response product that will divert hazardous material away from drains and other sensitive areas. Applications include: Spill response Temporary secondary containment Sealing off of doorways during washdown operations Product Highlights Standard 10-foot sections can be custom-cut to any length Unique, urethane material seals off liquid flow, "weeping" into small cracks and crevices Non-absorbing and easy to clean Can be reused multiple times Black versions are available to conceal dirt and grime Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain environmental conditions like temperature, humidity, and UV radiation. Regular inspection of the stored product should be done to ensure it is in a usable state. Ultra-Spill Berms Model Dimensions in. (mm) Weight lbs. (kg) Ultra-Spill Berm 120 x 4 x 2.3 (3048 x 101.6 x 57.2) 31 (14.1) Ultra-Spill Berm 120 x 4 x 2.3 (3048 x 101.6 x 57.2) 31 (14.1) Options Model Product Image Dimensions in. (mm) Weight lbs. (kg) Connector 7 x 4 x 1 (177.8 x 101.6 x 25.4) 2 (.9) Corner 4 x 4 x 2.3 (101.6 x 101.6 x 57.2) 3 (1.4) Carrying Case 25.5 x 25.5 x 5 (647.7 x 647.7 x 127) 6 (2.7)
$47.00 - $667.00
-
Ultra-Spill Collector Pallet Jack Model -No Drain
Versatile Ultra-Overpack Salvage Drums® offer the highest UN and DOT certifications available The Ultra-Overpack Salvage Drums® are the highest performing overpack poly drums available. The polyethylene (LLDPE) construction offers excellent chemical resistance and the “no-tools-required” closures make it ideal for spill response, clean up at contaminated sites, and the collection and transport of soiled sorbents. Applications Include: Overpacking of damaged or leaking packages Collection and transport of soiled sorbents Clean-up of contaminated sites Emergency response and decontamination Direct containment and transport of hazardous solids Spill kits Product Highlights Complies with UN Packaging Group 1 (X-Rating) and are certified for use as DOT Salvage Drums, 49 CFR 173.3 (c). The highest performing poly overpack drum on the market! Low-density polyethylene (LLDPE) construction offers excellent chemical resistance, including acids, caustics, and corrosives. Convenient, "no tools required" closures are perfect for clean-up and spill response activities. Nestable design and low tare weight allow convenient storage and reduced transportation costs. Lid can be tightened using a broom or shovel handle through the built-in holes. Additionally, a wooden beam (2x4) can be used with the built-in slots. 20- & 30-gallon drums have built-in slots — Use with zip ties for added tamper resistance. 20- & 30-gallon drums have molded-in foothold provides additional leverage point. LAND United Nations (UN) Transport of Dangerous Goods SEA International Maritime Organization (IMO); International Maritime Dangerous Goods Code (IMDG) Annex I-Section 8 AIR International Civil Aviation Organization (ICAO); Technical Instructions for the Safe Transport of Dangerous Goods by Air, Part 7, Chapter 4 AIR International Air Transport Association (IATA); Dangerous Goods Regulations, Section 10.3 Ultra-Overpack Salvage Drums Part # Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) Notes UT-0580 95-Gallon (For use with 55-gallon drums) 32.3 x 32.3 x 41.3 (819.2 x 819.2 x 1047.8) 95 (359.6) 48 (21.8) UN Marking: 1H2/X345/S/**/USA/M5904 UT-0582 65-Gallon (For use with 30-gallon drums) 29 x 29 x 36.3 (736.6 x 736.6 x 920.8) 65 (246.1) 40 (18.1) UN Marking: 1H2/X228/S/**/USA/M5904 UT-0585 30-Gallon (For use with 16-gallon drums) 22.9 x 22.9 x 30.1 (581.2 x 581.2 x 765.3) 30 (113.6) 15 (6.8) UN Marking: 1H2/X70/S/**/USA/+AA10183 UT-0587 20-Gallon (For use with 5-gallon drums) 21.8 x 21.8 x 19.3 (552.5 x 552.5 x 489) 20 (75.7) 12 (5.4) UN Marking: 1H2/X46/S/**/USA/+AA10183 Options Part # Model Product Image Dimensions in. (mm) Weight Capacity UDL lbs. (kg) Weight lbs. (kg) Notes UT-0417 Dolly 26.5 x 26.5 x 5 (673.1 x 673.1 x 127) 800 (362.9) 35 (15.9) For use with flat-bottom
$80.00 - $262.00
-
Ultra-Spill Collector®
Mobile secondary container provides maximum protection for the inner drum The Ultra-Spill Collector® is a simple yet effective spill containment unit for 55-gallon drums that also provides means for transporting the drums. Whether using a pallet jack, forklift or the optional dolly, the spill collector and the drum inside can easily be moved from one location to another. Simply use your drum lifter or other handling equipment to lift drums into the unit and you’re done! The Ultra-Spill Collector will capture any leaks or spills that may occur. Product Highlights Applications include satellite waste collection, general storage of chemical drums, and portable drum pumping stations. Rugged design allows unit to be safely handled by forklift under the top flange. Large, 66-gallon spill containment capacity. All-polyethylene construction will not rust or corrode. Optional dolly (Part UT-0417) is available for easier transport and portability. Ultra-Spill Collectors Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) Pallet Jack Model No Drain 32.5 x 32.5 x 28.5 (825.5 x 825.5 x 723.9) 66 (249.8) 28 (12.7) Pallet Jack Model With Drain 32.5 x 32.5 x 28.5 (825.5 x 825.5 x 723.9) 66 (249.8) 28 (12.7) Flat Bottom Model No Drain 34 x 34 x 27.3 (863.6 x 863.6 x 692.2) 66 (249.8) 27 (12.2) Flat Bottom Model With Drain 34 x 34 x 27.3 (863.6 x 863.6 x 692.2) 66 (249.8) 27 (12.2) WARNING: Part UT-0417 can expose you to chemicals including nickel which is known to the state of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov
$220.00 - $245.00
-
Ultra-Spill Pallet®
The Ultra-Spill Pallet® is specially constructed to support heavy loads and designed to be easily used and transported. Its 100% polyethylene (LLDPE) construction makes it compatible with a wide range of chemicals, while its low-rise walls allow easier accessibility for pouring. It helps meet spill containment regulations for up to four drums, and comply with SPCC and EPA spill containment requirements. Product Highlights High load capacity: 6,000 lbs. for Ultra-Spill Pallet P4, 3,000 lbs. for Ultra-Spill Pallet P2. Bright, safety yellow sidewalls are translucent, offering convenient visual leak detection. 100% polyethylene (LLDPE) construction - compatible with a broad range of chemicals, including acids and corrosives. Ultra-Spill Pallets® - P2 (Two-Drum) Model Part # Model Dimensions in. (mm) Grating Surface in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) UT-1010 P2 Pallet Model Without Drain 53 x 29 x 16.5 (1346.2 x 736.6 x 419.1) 48 x 24 (1219.2 x 609.6) 3000 (1360.8) 66 (249.8) 63 (28.6) UT-1011 P2 Pallet Model With Drain 53 x 29 x 16.5 (1346.2 x 736.6 x 419.1) 48 x 24 (1219.2 x 609.6) 3000 (1360.8) 66 (249.8) 63 (28.6) Ultra-Spill Pallets® - P4 (Four-Drum) Model Part # Model Dimensions in. (mm) Grating Surface in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) UT-1000 P4 Pallet Model Without Drain 53 x 53 x 11.8 (1346.2 x 1346.2 x 298.5) 48 x 48 (1219.2 x 1219.2) 6000 (2721.6) 66 (249.8) 90 (40.8) UT-1001 P4 Pallet Model With Drain 53 x 53 x 11.8 (1346.2 x 1346.2 x 298.5) 48 x 48 (1219.2 x 1219.2) 6000 (2721.6) 66 (249.8) 90 (40.8) Options Part # Model Product Image Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) UT-0678 Ramp for P1 Plus, and P4 Pallets (Excluding P4 Plus) 68.5 x 28.5 x 12 (1739.9 x 723.9 x 304.8) 318 (1203.8) 73 (33.1) UT-1006 P4 Pullover Cover 13 x 12 x 5 (330.2 x 304.8 x 127) N/A 7 (3.2) UT-1016 P2 Pullover Cover 13 x 11 x 3 (330.2 x 279.4 x 76.2) N/A 7 (3.2)
$245.00 - $513.00
-
Ultra-Spill Pallet® Economy Model
The Ultra-Spill Pallet® Economy Model was designed to help meet spill containment regulations without breaking the bank. By using recycled resin, we are able to make these spill pallets more economically and pass the savings on to our customers. Two models are available with a maximum capacity of two (2) or four (4) drums. The drain option allows any spilled contents to be easily removed. By storing 55-gallon drums (or other size containers) of hazardous material on our pallet, you can rest assured any incidental leaks or drips, as well as any spills, will be captured in the 66-gallon sump. The all-polyethylene 2′ x 4′ grating keeps drums above any spills and is easily removed to help facilitate clean-up. Both models can easily be moved, relocated, or transported with a pallet jack or forklift. An optional ramp is available with the 4-drum model for easier loading, unloading, and drum handling. Product Highlights 2-drum and 4-drum spill pallet models available. Applications for the all-polyethylene units include satellite waste collection and storage of virgin chemicals. Black color helps hide dirt and grime. Removable grating makes clean-up quick and easy. The first recycled spill pallet on the market! Ultra-Spill Pallet® - P2 Economy Model Part # Model Dimensions in. (mm) Grating Surface in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) UT-2504 P2 Economy Model, Without Drain 53 x 29 x 16.5 (1346.2 x 736.6 x 419.1) 48 x 24 (1219.2 x 609.6) 1200 (544.3) 66 (249.8) 63 (28.6) UT-2505 P2 Economy Model, With Drain 53 x 29 x 16.5 (1346.2 x 736.6 x 419.1) 48 x 24 (1219.2 x 609.6) 1200 (544.3) 66 (249.8) 63 (28.6) Ultra-Spill Pallet® - P4 Economy Model Part # Model Dimensions in. (mm) Grating Surface in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) UT-1112 P4 Economy Model, Without Drain 53 x 53 x 11.8 (1346.2 x 1346.2 x 298.5) 48 x 48 (1219.2 x 1219.2) 3000 (1360.8) 66 (249.8) 85 (38.6) UT-1113 P4 Economy Model, With Drain 53 x 53 x 11.8 (1346.2 x 1346.2 x 298.5) 48 x 48 (1219.2 x 1219.2) 3000 (1360.8) 66 (249.8) 85 (38.6) Options Part # Model Product Image Dimensions in. (mm) Weight Capacity UDL lbs. (kg) Weight lbs. (kg) UT-0678 Ramp for P1 Plus, and P4 Pallets (Excluding P4 Plus) 68.5 x 28.5 x 12 (1739.9 x 723.9 x 304.8) 700 (317.5) 73 (33.1) UT-1006 P4 Pullover Cover 13 x 12 x 5 (330.2 x 304.8 x 127) N/A 7 (3.2) UT-1016 P2 Pullover Cover 13 x 11 x 3 (330.2 x 279.4 x 76.2) N/A 7 (3.2)
$245.00 - $513.00
-
Ultra-Spill Pallet® Nestable Model
The Ultra-Spill Pallet® Nestable Model offers a reliable solution for capturing leaks and spills from steel or poly drums. This 4-drum capacity pallet features a 66-gallon sump, allowing for more capacity and a longer service life. Its nestable design saves on space, allowing multiple pallets to be stored in a minimal amount of space. Constructed from chemical-resistant polyethylene, it is compatible with a broad range of acids and corrosives, while its 10" height ensures easy handling. For added convenience, the pallet can be used with a forklift. The innovative design of the Ultra-Spill Pallet® Nestable Model allows sumps to be perfectly nested to maximize valuable shipping and storage space. This can be a crucial advantage when shipping large quantities of spill pallets, especially overseas. For example, we can ship eight-eight (88) of our standard 4-drum spill pallets in a 53′ truck. In that same sized container, we can ship three hundred and eighty-four (384) nestable spill pallets! Of course, that translates to smaller (LTL) shipments too, but the freight savings are obvious. Product Highlights Large sixty-six (66) gallon sump captures leaks and spills from steel or poly drums (4-drum capacity). Nestable design allows multiple pallets to be shipped (or stored) in a minimal amount of space. 100% polyethylene (LLDPE) construction - compatible with a broad range of chemicals, including acids and corrosives. Low-profile (10" height) makes drum handling safer and easier. 2-way forklift-able - provides easy positioning and relocation. Ultra-Spill Pallet® - P4 Nestable Model Part # Model Dimensions in. (mm) Grating Surface in. (mm) Weight Capacity UDL lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) UT-1230 Nestable Model, Without Drain 51 x 51 x 10 (1295.4 x 1295.4 x 254) 48 x 48 (1219.2 x 1219.2) 6000 (2721.6) 66 (249.8) 80 (36.3) UT-1231 Nestable Model, With Drain 51 x 51 x 10 (1295.4 x 1295.4 x 254) 48 x 48 (1219.2 x 1219.2) 6000 (2721.6) 66 (249.8) 80 (36.3) Options Part # Model Product Image Dimensions in. (mm) Weight Capacity UDL lbs. (kg) Weight lbs. (kg) UT-0676 Ramp for P2 Plus, P3 Plus, and P4 Plus 55.5 x 28.5 x 8.8 (1409.7 x 723.9 x 222.3) 700 (317.5) 43 (19.5) UT-1006 P4 Pullover Cover 13 x 12 x 5 (330.2 x 304.8 x 127) N/A 7 (3.2)
$282.00 - $513.00
-
Ultra-Spill Tray®
Versatile secondary containment for small containers and packages You won’t find 55-gallon drums on top of most laboratory countertops. So, it goes without saying that you’re even less likely to find a spill pallet on those countertops. But that doesn’t mean there’s not a need for spill containment for the smaller containers that are commonly used in labs, research environments, and medical facilities. The Ultra-Spill Trays® provide countertop spill containment of up to 2.9 gallons for jars, beakers and other smaller containers. The tray’s grating keeps containers out of any spillage and is easily removed if any cleanup is necessary. A built-in spout makes removing any spilled liquids quick and easy. Product Highlights Countertop spill containment tray safely stores bottles, beakers, and other labware. Makes decanting of small quantity liquids safer, cleaner, and more manageable. Features built-in pouring spout to conveniently remove spills. Designed for use in research, laboratory, medical, and industrial facilities. All-polyethylene construction provides excellent chemical compatibility. Removable grating makes clean up quick and easy. Ultra-Spill Trays® Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) P2 Model 17 x 12 x 4 (431.8 x 304.8 x 101.6) 1.8 (6.8) 5 (2.3) P4 Model 21 x 17 x 4 (533.4 x 431.8 x 101.6) 2.9 (11) 9 (4.1)
$62.00 - $89.00
-
Ultra-Stacking Shelf®
Double or triple stack buckets, pails, and small containers If you’re using your spill pallet, deck or platform for smaller containers, why not create more space by “going vertical” with them. The Ultra-Stacking Shelf® provides a shelving option for smaller containers that need containment. They can be safely stacked up to three high and are designed so that any leaked or spilled liquids are channeled down the sides of the shelf and down into the pallet’s sump. Product Highlights Fits on any spill pallet or spill deck Stacks up to 3 high Saves floor space Contoured top surface channels spills or leaks into the sump below Lightweight, all-polyethylene construction Ultra-Stacking Shelf® Model Color Dimensions in. (mm) Weight lbs. (kg) Quantity Ultra-Stacking Shelf® Yellow 47.8 x 14.8 x 24 (1212.9 x 374.7 x 609.6) 35 (15.9) 1 Shelf Ultra-Stacking Shelf® Black 47.8 x 14.8 x 24 (1212.9 x 374.7 x 609.6) 35 (15.9) 1 Shelf
$253.00 - $258.00
-
Ultra-Tanker Berm
Capture leak, drips and spills from tanker trucks and rail cars The Ultra-Tanker Berm is a lightweight, portable spill containment solution that can be deployed quickly and easily to contain leaks, drips, and spills from over-the-road tankers or rail tank cars. Made with heavy-duty 40 oz PVC material, the Ultra-Tanker Berm offers excellent chemical resistance and stands up to the rigors of daily tanker operations. Pre-installed two-inch camlock fittings provides easy drainage to larger containment vessels. Product Highlights Lightweight, portable spill containment unit can be quickly and easily put into place to contain leaks, drips and spills. Heavy-duty, PVC material (40 oz) provides excellent chemical resistance – stands up to rigors on site or on the road. Two included, pre-installed Camlock fittings (2”) provide quick access points for drainage to larger containment/retention vessels, spill response vehicles or cleanup equipment Closed cell foam provides sidewalls with structure—can be removed when not in use for more compact folding/storage. Can be used under rail cars, tanker trucks or other equipment, vehicles, vessels or containers. Available in 5’ x 10’, 10’ x 10’ and custom sizes. Ultra-Tank Berm Product Name Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) Ultra-Tanker Berm - 5'x10' 120 x 60 x 12 (3048 x 1524 x 304.8) 374 (1415.7) 65 (29.5 Ultra-Tanker Berm - 10'x10' 120 x 120 x 12 (3048 x 3048 x 304.8) 748 (2831.4) 80 (36.3
$1,483.00 - $1,675.00
-
Ultra-Track Berm®
The Ultra-Track Berm® offers superior track-side protection with its lightweight and portable design. The dual sump design, made of durable 40 oz. PVC material, allows for drainage via two stainless steel camlock fittings, while the walls are constructed using closed-cell foam for strength and durability in harsh railroad conditions. Portable containment unit captures railcar leaks and spills Leaky locomotives and tanker cars can wreak environmental havoc on a railroad site. For loading areas, maintenance locations and other sections where leaks and spills are frequent, a more permanent spill containment system like the Ultra-Track Pans is an excellent solution. But for a portable spill containment / spill response solution, the Ultra-Track Berm® may be just the right answer. The track berm is portable enough to be quickly and effectively moved by one person to a leak or spill and can capture up to 144 gallons. If a larger spill occurs or greater capacity is needed, drain hoses (not included) can be connected to the camlock fittings so the spilled material is directed to a waste collection area or larger container. Product Highlights Lightweight and portable spill containment unit is easily placed under leaking/spilling railcars. Dual-sump design provides protection for area on either side of the rail. Two (2) stainless steel camlock fittings allow quick and leak-free drainage of spilled chemicals. Closed-cell polyethylene (LLDPE) foam provides secure sidewall structure. Durable 40 oz. (42 mil) PVC construction withstands harsh railroad conditions and provides excellent chemical compatibility. Additional Information The berm is made using 40 oz. (42 mil) PVC which is very durable and provides excellent chemical resistance While the Ultra-Track Berm is built to last with heavy-duty materials and components, it weighs in at only 24 lbs. (10.9 Kg) so it can be easily transported to wherever it is needed. The steel connectors are camlock fittings and they are used to connect hoses to in case of a large or catastrophic spill. The hoses can be used to channel spillage to a holding tank or other containment area. Ultra-Track Berm Part # Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) UT-8490 40 oz. (42 Mil) PVC 72 x 48 x 12 (1828.8 x 1219.2 x 304.8) 144 (545) 24.0 (10.9) WARNING: Part UT-8490 can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov
$1,242.00
-
Ultra-Track Pan
Capture hazardous spills from railroad tanker cars Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. The modular design can be used for spill control for everything from small drips during maintenance to catastrophic spills from tanker cars. Product Highlights Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow. Long work life - estimated to perform 20-30 years. Modular design - center and side pans are 53.5" long; railroad spill containment areas can be easily assembled to any length desired All-polyethylene construction - rugged track pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F. Sealed system - polyethylene (LLDPE) gaskets keep spills from falling between the rails and pans. Below grade piping - all center and side track pans are molded with pipe fitting locators at their lowest point. Below grade piping can be installed to channel large spills to oil/water separators, holding ponds, etc. Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the center pan covers; rain is channeled onto the ballast between the tracks, stays out of the pans. Low maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation — lightweight track pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces - pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Optional track pan covers keep rainwater out of the pans, providing effective stormwater management. Advantages of Ultra-Track Pans vs Competitive Products Easy Installation: Lightweight, smaller pans are very easy to move around and install without heavy equipment Chemical Resistance: Polyethylene construction has excellent chemical resistance – better than metal and other materials. Patented Gasket System: Seals against the rail eliminating a potentially large leak point. Grating is Included: All Ultra-Track Pans come with grates as part of the design/integrity for walking on or setting up drive over points. Personnel do not have to walk in spilled product in pans due to grating in every pan, reducing liability. Modular: If something gets damaged, only a small section will need to be replaced. Patented Horizontal Flow: Flow-through channels and bulkhead fittings allow spills to travel from pan to pan. Track pans, of all kinds, have limited capacity, so routing a spill sideways and then through below-grade piping is very critical. Patented Stormwater Protection: When optional covers are installed, any rain water that collects on the center cover is directed to the patented stormwater feature that allows the water to drain to the ballast below the pans. Multiple Drain Capacity: Ultra-Track Pans are designed so they can accommodate multiple drains in as many pans sections as desired. Covers: Available to keep rainwater out of the pans. Crude Oil Applications: Viton gaskets available for installations in crude oil loading/off-loading areas. Longevity: Estimated 20-30 year work life. Ultra-Track Pans - With Grates - No Covers Part # Model Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) Quantity 9564 Center Pan with Grates and Stormwater Drain 53.5 x 53.5 x 6 (1358.9 x 1358.9 x 152.4) 18 (68.1) 112 (50.8) 2 bulkhead fittings, 4 gaskets and 2 grates 9566 Center Pan with Grates 53.5 x 53.5 x 6 (1358.9 x 1358.9 x 152.4) 18 (68.1) 112 (50.8) 2 bulkhead fittings, 4 gaskets and 2 grates 9576 Side Pan with Grates 53.5 x 27.5 x 6 (1358.9 x 698.5 x 152.4) 19 (71.9) 58 (26.3) 1 bulkhead fitting, 2 gaskets and 1 grate Ultra-Track Pans - Covers Only Part # Model Dimensions in. (mm) Weight lbs. (kg) 9580 Center Pan Cover 55 x 52.5 x 0 (1397 x 1333.5 x 0) 24 (10.9) 9581 Side Pan Cover 55 x 28.3 x 0 (1397 x 717.6 x 0) 11 (5) Options Part # Model Weight lbs. (kg) 9584 Rebar Fasteners With Protective Caps 30 (13.6) 9559 3" dia. Bulkhead Fitting (for below grade piping) 3 (1.36) 9571 Grate Only For Center Pan - Left Grate 33 (15) 9572 Grate Only For Center Pan - Right Grate 33 (15) 9573 Grate Only 35 (15.9)
$102.00 - $849.00
-
Ultra-Transformer Tray®
Simple and effective spill containment for transformers The Ultra-Transformer Tray provides spill containment for electrical transformers and other power distribution equipment that is being stored, shipped or repaired. The all-polyethylene construction provides excellent compatibility as well as years of outdoor service. Ultra-Transformer Tray can help electrical utilities comply with the requirements set forth by the Spill Prevention, Control, and Countermeasures (SPCC) rule. The SPCC rule defines several classes of oil storage. The most common is bulk oil storage, which includes tanks, drums, and other vessels that store oil before it is used. Oil-filled power distribution equipment devices fall under a class of oil storage known as oil-filled operational equipment. Applications include spill containment for: Voltage regulators Transformers Circuit breakers Autoreclosers Oil/grease covered equipment or machinery Product Highlights Capture leaks, drips, and spills from distribution transformers and other equipment. Polyethylene construction provides excellent chemical compatibility with PCBs and other oils. Rugged construction provides years of service. Ultra-Transformer Tray Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) 48 x 48 x 5.6 (1219.2 x 1219.2 x 143) 50 (189) 25 (11.3) NOTE: Because of the molded-in support sections, the transformer tray has a maximum usable space of 34″ x 34″ (864 mm x 864 mm).
$223.00
-
Ultra-Trench Filter Boom®
Stop oil and other hydrocarbons from entering trench drains There are a number of UltraTech stormwater management products for standard storm drains. A smaller number of combination drains… but still a fair amount. So when we were challenged by a customer for a solution to keep residual fuel from being washed down their trench drains, we were surprised that there wasn’t something already available. The challenge with most trench drains is their shape… long, narrow and shallow. That combination makes typical drain solutions impractical. With the Ultra-Trench Filter Boom, we move the filtering solution above the drain and actually treat the water before it even reaches the drain. Using Ultra-X-Tex material, hydrocarbons are quickly removed and captured from the stormwater flow, allowing only clean rainwater to flow into the trench drain. Product Highlights A simple yet effective solution to keeping oil, gas, fuel and other pollutants out of trench drains. Made with Ultra-X-Tex, a high performance sorbent and filtering media that is capable of absorbing an average of 13 times its own weight of liquid hydrocarbons. Allows large volumes of water to pass through while absorbing liquid hydrocarbons, including petroleum, animal and vegetable oils. The center of the Ultra-Trench Filter Boom is designed to allow rebar (not included) to be inserted - providing additional weight to keep the unit in place. Designed to handle any type of vehicular traffic unlike sorbent ‘socks’ which burst or deform when driven over. Ultra-Trench Filter Boom Model Dimensions in. (mm) Absorption Capacity gal. (L) Weight lbs. (kg) Ultra-Trench Filter Boom 96 x 3 x 3 (2438.4 x 76.2 x 76.2) 3.3 (12.5) 1.6 (.7)
$37.00
-
Ultra-Utility Box®
Versatile utility box can be used for spill kits, storage bins and much more The Ultra-Utility Box is a heavy-duty, polyethylene (LLDPE) lockable bin that can be used for a spill kit, tool storage as well as many other applications. It is easily transported with a forklift, pallet jack or using the optional casters. Product Highlights Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy-duty, double-walled lid is sloped to shed rain. Optional casters available. Available in forest green, safety orange and yellow. Ultra-Utility Boxes Model Color Dimensions in. (mm) Weight lbs. (kg) Forest Green Model Without Wheels Forest Green 48 x 31 x 31.5 (1219.2 x 787.4 x 800.1) 60 (27.2) Safety Orange Model Without Wheels Orange 48 x 31 x 31.5 (1219.2 x 787.4 x 800.1) 60 (27.2) Yellow Model Without Wheels Yellow 48 x 31 x 31.5 (1219.2 x 787.4 x 800.1) 60 (27.2) Forest Green Model With 5" Solid Rubber Wheels Forest Green 48 x 31 x 38 (1219.2 x 787.4 x 965.2) 68 (30.8) Safety Orange Model With 5" Solid Rubber Wheels Orange 49 x 31 x 38 (1244.6 x 787.4 x 965.2) 68 (30.8) Yellow Model With 5" Solid Rubber Wheels Yellow 48 x 31 x 38 (1219.2 x 787.4 x 965.2) 68 (30.8) Forest Green Model With 8" Pneumatic Wheels Forest Green 48 x 31 x 41.8 (1219.2 x 787.4 x 1060.5) 92 (41.7) Safety Orange Model With 8" Pneumatic Wheels Orange 48 x 31 x 41.8 (1219.2 x 787.4 x 1060.5) 92 (41.7) Yellow Model With 8" Pneumatic Wheels Yellow 48 x 31 x 41.8 (1219.2 x 787.4 x 1060.5) 92 (41.7) WARNING: Part #0860-#0868 can expose you to chemicals including lead which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov
$471.00 - $810.00
-
Ultra-Utility Tray®
Keep messy drips and spills off warehouse and factory floors UltraTech’s Ultra-Utility Trays are engineered with heavy-duty polyethylene (LLDPE) and designed to contain liquid spilled or leaked from containers. A ribbed platform on the bottom of the tray helps keep cans, pails and other containers out of smaller spills. Practical Applications Include: Storing oil cans or other liquid-holding containers Spill containment for leaky machine parts or equipment Placement under trucks or other large vehicles to leaks / spills from engines, hydraulics, or other lubricated parts. Product Highlights Heavy-duty polyethylene (LLDPE) construction - will not rust or corrode. Nestable for easy storage when not in use. Available in six sizes for a variety of spill containment and maintenance applications. Ribbed bottom keeps cans, pails and other containers elevated above any spills or leaks. Ultra-Utility Trays Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg) Outside: 52.3 x 16.3 x 5 (1327.2 x 412.8 x 127)Inside: 48 x 12 x 4.75 (1219.2 x 304.8 x 120.65) 12 (45.4) 8 (3.6) Outside: 52.3 x 28.3 x 5 (1327.2 x 717.6 x 127)Inside: 48 x 24 x 4.75 (1219.2 x 609.6 x 120.65) 24 (90.8) 12 (5.4) Outside: 52.3 x 34.3 x 5 (1327.2 x 870 x 127)Inside: 48 x 30 x 4.75 (1219.2 x 762 x 120.65) 30 (113.6) 13 (5.9) Outside: 40.3 x 28.3 x 5 (1022.4 x 717.6 x 127)Inside: 36 x 24 x 4.75 (914.4 x 609.6 x 120.65) 18 (68.1) 9 (4.1) Outside: 40 x 40 x 5 (1016 x 1016 x 127)Inside: 36 x 36 x 4.75 (914.4 x 914.4 x 120.65) 27 (102.2) 11 (5) Outside: 52 x 44 x 4 (1320.8 x 1117.6 x 101.6)Inside: 48 x 40 x 3.5 (1219.2 x 1016 x 88.9) 30 (113.6) 19 (8.6)
$58.00 - $176.00
Has visto 144 de 151 productos